BWBDJ - BALL METAL POLISH, 16-806
- MSDS: BWBDJ
- Manufacturer: BALL INDUSTRIES
- Product Name: BALL METAL POLISH, 16-806
- National Stock Number: 7930-00N055375
Product Identification
Product ID:BALL METAL POLISH, 16-806
MSDS Date:08/19/1988
FSC:7930
NIIN:00N055375
MSDS Number: BWBDJ
Responsible Party
EL SEGUNDO, CA 90245
US
Emergency Phone: 213-537-4311
Info Phone: 213-772-4131
Cage: 12120
Contractor
Telephone: 213-772-4131
Cage: 12120
Ingredients
AMMONIA (SARA III)
CAS: 7664-41-7
RTECS: BO0875000
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM/35 STEL
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
OXALIC ACID
CAS: 144-62-7
RTECS: RO2450000
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3/2 STEL
Hazards
LD50 LC50 Mixture:LD50:(ORAL, RAT)15.7 ML/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC:TRANSIENT EYE
IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
INGEST:INDUCE VOMITING. EYE:FLUSH WITH WATER FOR @ LEAST 15
MINUTES.
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:NOT APPLICABLE. USE NIOSH/MSHA APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:WASH AWAY WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NOT APPLICABLE. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Protective Gloves:NOT REQUIRED.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Appearance and Odor:OFF WHITE LIQUID, AMMONIA ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:FLUSH INTO SEWER WITH LARGE AMOUNT OF WATER.
DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.